Item: 100Base TX to 100Base Fibre Optic Converter ST
Item code: TT100-TF100ST
Download PDF file
DESCRIPTION:
ST Connector Multimode Media Converter
TT100-TF100ST is a Fast Ethernet 100Base-TX to Fiber 100 Base-FX converter. This model features one fiber port with ST connector. Other available fibre connectors include SC,MT-RJ or VF-45 connector and one twisted pair port with RJ-45 connector. It converts electrical signal from 100Base-TX side into optical signal at 100Base-FX side and vice versa. The TT100-TF100ST series converter can be used as a standalone unit or as a slide-in module to the 19" converter rack (up to 10 units) for use at a central wiring closet.
KEY FEATURES
Support 100BaseT Ethernet UTP
Other available fiber connectors: SC/MT-RJ/VF-45 for multi-mode and single-mode
Standalone or composite applications
SPECIFICATION
Technical Specification Standard |
IEEE802.3u Fast Ethernet 100Base-TX and 100Base-FX standards |
Features STP and Fiber connectors |
TT100-TF100XX RJ-45 and ST/SC/VF45/MTRJ connector (Multi-mode) |
Data Transfer Rate |
100Mbps |
Duplex Mode |
Full-or Half-duplex mode |
LED |
Pwr, Fdx, FX Link, FX Act, TX Link, TX Act |
Power Requirement |
1A@+5V |
Ambient Temperature |
0°to 50°C |
Humidity |
5% to 90% |
Dimension |
26mm(H) x 71mm(W) x 97mm (D) |
Cable |
UTP : Cat. 5 UTP cable
Fiber : 50/125, 62.5/125, 100/140m multi-mode
8.3/125, 8.7/125, 9/125, 10/125m single-mode |
UTP Cable Limitations |
Half Duplex : 1m (up to 100m, subject to fiber length)
Fiber : 50/125, 62.5/125, 100/140m multi-mode |
Fiber Cable Limitations |
100Base-TX/FX(multi-mode) network allows 512-bit time delay between any two nodes in a collison domain. |
Connecting to (Full/Half-duplex) Cable Limitations |
Full-duplex (multi-mode) Node to Hub : 2Km Hub to Hub : 2Km
Full-duplex (single-mode) Node to Hub : 20Km Hub to Hub : 20Km
Half-duplex (multi-mode) Node to Hub : 412m Hub to Hub : 412m |
|